Shutter Operation
Press Focus Operation
Cock the shutter by moving the shutter
cocking lever (19).
Screw the end of the cable release which
extends from the hand grip into the cable
release socket (25).
To release the shutter, press the shutter
release trigger of the hand grip with the left
forefinger. Also, the shutter can be released
by tripping the shutter release lever (23).
When focusing through the ground glass,
keep the shutter open by the following
method.
1
.
Cock the shutter, regardless of the shutter
speed setting.
2. Disengage the lock button by thoroughly
pushing it to the camera body side and
turn the press focus lever in the shutter
cock direction; then the shutter will remain
open.
By pushing the press focus lever back
to its original position, the shutter will
close. There is no need to reset the
shutter.
PRECAUTION :
Be sure to operate the press focus lever
AFTER cocking the shutter. While the shutter
is kept opened, the shutter cannot be re-
leased with the shutter release button.
Applying an excessive force to the release
button may cause shutter damage.
When the press focus lever is not used,
be sure to engage the lock button to prevent
inadvertently moving the lever.
16
To Next Page
Loading...
