Mamiya Universal - Cut Film;Plate Holder (Type J); Open the Back Lid; Memo plate

Cut Film/Plate Holder (Type J)
When Using a Dry Plate 2 ½ x 3 ½ When Using a Cut Film 2 ½ x 3 ½
inch (6.5 x 9 cm) : inch (6.5 x 9cm):
When Using a Cut Film Taken by
Cutting a 4 ¾ x 6 ½ inch Cut Film
into Four One-quarter Sizes:
Back lid catch
I-
Dark slide
Open the Back Lid:
By pulling out the back lid
catch, the back lid can be swung
open by applying finger pressure
to the finger grip.
Memo plate :
Use the memo plate for
recording on the holder your file
number, the film type, and so on,
Correct recorded letters or
figures by rubbing the plate with
a finger tip, soft cloth, or tissue.
Remove the film sheath from
Remove the film sheath from
the holder, insert the dry plate
the holder, place the cut film with
with the emulsion side facing the
its emulsion side facing the dark
dark slide, close the back lid, and slide, then place the film sheath
push it back to its original position. with the film catch side up, and
In this case, the film sheath is not close the back lid. Instead of the
used.
film sheath, a discarded dry plate
may be used
Insert the cut film in the film
sheath with its emulsion side up,
placing the sheath in the holder.
When a color film is cut,
sometimes the film is not de-
veloped at a developing labora-
tory. For color photography,
therefore, use factory-cut 2 ½ x 3 ½
inch (6.5 x 9cm) color film.