Mamiya Universal - Cut Film;Plate Holder (Type A)

When Using a Dry Plate 2 ½ x 3 ½ When Using a Cut Film 2 ¼ x 3 ¼
inch (6.5 x 9cm):
inch:
4
Remove the film sheath from
Use the cut film/plate holder
the holder, insert the dry plate (type A). Insert a film in the film
with the emulsion side facing the
sheath, place it in the holder, and
dark slide, close the back lid, and
close the back lid. This film sheath
push it back to its original po-
is exclusive for type A; do not use
sition. In this case, the film sheath
it with a type J holder.
is not used.
31 31