Focusing Hood
Attach the holder to the camera body, pull
out the dark slide, and start to photograph.
After each exposure, open the back
window, and turn the film advance knob until
the next figure appears in the window.
When removing the holder from the
camera or changing the lens while the film is
loaded, be sure to insert the dark slide.
Viewfinder Field for Photographing in 6 x
6 or 6 x 4.5 Format.
Attach a finder mask for 100 mm lens to
the viewfinder window of the camera body
(this mask is for 6 x 6 format). For photo-
graphing in 6 x 4.5 format, insert the mask
for 6 x 4.5 format into the back of the 6 x 6
format mask.
To attach the mask to the camera body,
raise the flat spring attached in front of the
mask by holding it with the thumb and forefin-
ger, and apply the mask to the top cover
front frame and releasing the raised flat
spring.
To correct parallax, select the brilliant
frame for 250mm lens, moving the eye
around while looking into the viewfinder until
the brilliant frame is centered in the entire
viewfinder field.
For accurate focusing or for confirming
the depth of field, use the focusing hood. A
Fresnel lens is used with this focusing hood
to make the whole image brighter and easier
to focus.
24
To Next Page
Loading...