8
9
Checking and adjusting start of fuel delivery
25
Fig. 8
The light signal transmitter KDEP 1601 (Fig.) is
energized by its own power supply.
b. Sleeve
Fig. 9
If a light signal transmitter is not available, good
measurement results can also be achieved with a
plug-in sleeve.
The sleeve is to be made of aluminium or steel
Set engine to start of delivery as described above.
Insert the sleeve into the governor housing up to
the stop.
The start of delivery is set exactly when the pointer
for start of delivery is in the centre of the 3 mm
bore in the sleeve.
3393
ø9
ø15
ø12
ø11
ø3
29
13
15
30
2259
To Next Page
Loading...
Need help?
General
