M&S Systems dmc1 - Scan Mode Operations; Scan Mode Explanations

dmc1
M&S Systems | 2861 Congressman Lane | Dallas, Texas 75220 | 800.877.6631 | www.mssystems.com 6
Scan Mode
Two scan modes are available:
• Scan
1—Allows users at Room/Patio stations to scan through the four music
sources (AUX, AM, FM, CD). On radio bands AM and FM, Scan 1 scans through the
preset radio stations: AM
1-8 and FM 1-8. See Music Settings/Radio Settings for
information on how to preset radio stations.
• Scan 2—Allows users at Room/Patio stations to scan through the four music
sources (AUX, AM, FM, CD.) On radio bands AM and FM, Scan 2 scans all strong
stations before moving on to the next source.
Figure 4—Scan Progressions
To set the Scan Mode:
1. To change the scan mode, simultaneously press and release PRESET and SOURCE
again. The display shows either Scan1 or Scan2.
Note: You can exit out of scan mode by pressing PRESET and SOURCE or waiting for
the display to show the clock time again.
Scan 1
AUXAM 1-8FM 1-8CD
Scan 2
AUX AM Strong Stations FM Strong StationsCD