M&S Systems dmc1 - Audio Settings; Volume Adjustments; Tone Adjustments

dmc1
M&S Systems | 2861 Congressman Lane | Dallas, Texas 75220 | 800.877.6631 | www.mssystems.com 7
Figure 5—Scan Mode
Audio Settings
Volume
• Music—Adjusts the volume for system music
• Master Station—Adjusts the volume for the speaker on the Master Station only
• Intercom—Adjusts the volume for the system intercom
Tone
• Loudness
• Treble
• Bass
• Balance (if you have the optional stereo power amplifier)
To change volume and tone settings:
1. Press POWER to turn on music. The system defaults to music volume. Use
VOLUME UP and VOLUME DOWN to adjust the music volume from 0-29. All
other audio settings return to music volume after 5 seconds.
2. Press TONE. Master Volume appears. This controls the volume for the Master
Station speaker only. Use VOLUME UP and VOLUME DOWN to adjust the Master
Volume from 0-
14.
¿
TUNE
SCAn1
A
UTO
TIME
PRESET
POWER
TONE
SOURCE
¿
VOLUME
À
LISTEN TALK
DOOR TALK
¿
TUNE
À
PRESET + SOURCE
Change Scan mode.