1-5
- The machines designed by MANITOU are designed to be used in the following temperature range:
• Minimum temperature: -20°C
• Maximum temperature: +45°C
- Special features are available, as an option, for particularly cold environments.
For operation under average climatic conditions, i.e. : between -15 °C and + 35 °C, corr
ect levels of lubricants in all the
circuits are checked in production. For operation under more severe climatic conditions, before starting up, it is
necessary to drain all the circuits, then ensure correct levels of lubricants using lubricants properly suited to the relevant
ambient temperatures. It is the same for the cooling liquid.
- A platform operating in an area without fire extinguishing equipment must be equipped with an individual extinguisher.
T
here are solutions, consult your dealer.
Your platform is designed for outdoor use (see chapter: 2 - DESCRIPTION, CHARACTERISTICS pages) under normal
atmospheric conditions and indoor use in suitably aerated and ventilated premises. It is prohibited to use the platform
in areas where there is a risk of fire or which are potentially explosive (e.g. Refineries, fuel or gas depots, stores of
inflammable products…). For use in these areas, specific equipment is available (ask your dealer for information).
C - MODIFYING THE PLATFORM
- For your safety and that of others, you must not change the structure and settings of the various components used in your platform
(hydraulic pressure, calibrating limiters, I.C. engine speed, addition of extra equipment, addition of counterweight, unapproved
attachments, alarm systems, etc.) yourself. In this event, the manufacturer cannot be held responsible.
- Your lifting platform is delivered with standard wheels or all-terrain wheels. It is FORBIDDEN to switch from one type of wheels to
another: RISK OF THE LIFTING PLATFORM BECOMING UNSTABLE.
THE INSTRUCTIONS
- The operator’s manual must always be in good condition and kept in the place provided on the platform and in the language used by
the operator.
- You must necessarily replace the instructions manual, as well as any plates or stickers, if they are no longer legible or are missing or
damaged.
THE MAINTENANCE
- Maintenance or repairs other than those detailed in the chapter 3 - MAINTENANCE must be carried out by qualified personnel (consult
your dealer) and under the necessary safety conditions to maintain the health of the operator and any third party.
Your patform must be inspected periodically to ensure that it remains in compliance. The frequency of this inspection is
defined by curr
ent legislation in the country in which the platform is use
- Example for France : The manager of the compagny using the platform must set up a maintenance book for each machine and keep up-
t
o-date (Ministerial Order of 2nd March 2004).
647536 (10/04/2017)
150 AETJ C / 170 AETJ L
To Next Page
Loading...
Need help?
General
