2-20
EN
648970 IT-EN-FR (18/02/2016)
SPECIFICATIONS AND WEIGHTS
MRT 2550 PLUS
Driving speed
Maximum speed:
km/h - mph 40 - 24,85
Forward unloaded
km/h - mph 40 - 24,85
With nominal load
km/h - mph 5 - 3,1
Reverse unloaded
km/h - mph 40 - 24,85
With nominal load
km/h - mph 5 - 3,1
Lifting capacity
Standard lifting height on tyres m - ft 21,8 - 71.5
Standard lifting height on stabs m - ft 25,78 - 84.5
Lifting heigt at max capacity on tyres m - ft 14 - 45.9
Lifting heigt at max capacity on stabilizers m - ft 14,2 - 46.5
Forward reach at max capacity on tyres m - ft 5,75 - 18.8
Forward reach at max capacity on stabilizers m - ft 7,5 - 24.6
Max rated capacity with STD carriage and forks kg - lb 4999 - 11020
Distance from center of gravity mm - in 500 - 19.6
Capacity at max height with STD carriage and forks on tyres kg - lb 2000 - 4409
Capacity at max height with STD carriage and forks on stabilizers kg - lb 2000 - 4409
Capacity at max reach with STD carriage and forks on tyres kg - lb 100 - 220
Capacity at max reach with STD carriage and forks un stabilizers kg - lb 400 - 882
Weight distribution with STD carriage and forks
Truck weight without attachment kg - lb 18470 - 40719.33
Front axle weight without attachment kg - lb 7750 - 17085.8
Rear axle weight without attachment kg - lb 10720 - 23633.53
Truck weight with STD carriage and forks (unloaded) kg - lb 18900 - 41667.32
Front axle weight with STD carriage and forks (unloaded) kg - lb 8700 - 19180.19
Rear axle weight with STD carriage and forks (unloaded) kg - lb 10200 - 22487.12
Max load on each stabilizer
kg - lb
11216 - 11706,53
Max load per tyre
kg - lb
8510 - 18761,32
Maximum ground pressure - kg/cm
2
9
Pulling capability
Tractive force (Drawbarpull) daN 8800
Break out force with bucket (according to standard ISO 8313) - -
Gradeability
Unloaded % -
Loaded % -
Turret
Slewing turret deg. 360°
Locking system type Manual pin
Outriggers
Type Articulated
Nb 4
Contrôle Individual or simultaneous control
Hydraulic motions speeds
Unladen lifting s -
Laden lifting s -
Unladen lowering s -
Laden lowering s -
Unladen extending s -
Laden extending s -
Unladen retracting s -
Laden retracting s -