3 - 11
A5 – BOOM PADS
CLEAN - GREASE
To be carried out every 10 hours during the first 50 hours service,
then once at 250 hours.
IMPORTANT
If the lift truck is used in an abrasive environment (dust, sand, coal) Use lubricating
varnish (MANITOU part no.: 483536). Please consult your dealer. Fully extend the boom.
- Apply the grease with a brush (see: 3 - MAINTENANCE:
LUBRICANTS AND FUEL) to the 4 sides of the telescope(s).
- Telescope the boom several times in order to spread the coat
of grease evenly.
- Remove the surplus of grease.
647563 (22/08/2017)
MT 1435/1440/1840 EASY 75D ST3B S1
To Next Page
Loading...
Need help?
General
