Manitou MT 1435 EASY 75D ST3B S1 - DESCRIPTION AND USE OF THE OPTIONS

2 - 60
DESCRIPTION AND USE OF THE OPTIONS
1 - LICENSE PLATE LIGHT
2 - MODCLE ANTI-START SYSTEM
3 - BOOM ELECTRICAL PREDISPOSITION
4 - QUICK-RELEASE COUPLER ON ATTACHMENT CIRCUIT
5 - ANGULAR SECTOR ON BOOM
6 - EXTERIOR DRAIN-BACK
7 - ATTACHMENT HYDRAULIC LOCKING
8 - BOOM HEAD ELECTROVALVE
9 - BOOM HEAD ELECTROVALVE + HYDRAULIC ATTACHMENT LOCKING
10 - SINGLE SIDE-SHIFT CARRIAGE (TSDL)
11 - DUAL EFFECT REAR HYDRAULIC CONTROL PREDISPOSITION
12 - LIFTING RING ON SINGLE CARRIAGE
1 - LICENSE PLATE LIGHT
2 - MODCLE ANTI-START SYSTEM
OPERATION
- Switch on lift truck ignition, red LED 1 will flash.
- Apply key 2 to its base 3, and withdraw the moment the system emits a continuous
beep, and LED 1 turns green.
- Start the lift truck within the next 20 seconds; otherwise the anti-theft system will
be reactivated and red LED 1 will flash.
NOTE: You can restart the lift truck within 20 seconds of stopping it: after this time,
the anti-start system reacts and LED C flashes red.
3 - BOOM ELECTRICAL PREDISPOSITION
MT 1435/1440 …
Enables an electrical function to be used at the head of the boom.
OPERATION
- Set switch 1 to position A to enable the predisposition. The indicator lamp comes
on to show that it is enabled.
647563 (22/08/2017) MT 1435/1440/1840 EASY 75D ST3B S1