Manitou MT 1435 EASY 75D ST3B S1 User Manual

3 - 25
1
1
1
2
3
D7 – FRONT AND REAR AXLE DIFFERENTIAL OIL
DRAIN
Place the lift truck on level ground with the engine stopped and the still warm differential
oil.

IMPORTANT

Dispose of the drain oil in an ecological manner.
- Place a container under the drain plugs 1 and unscrew them.
- Remove level plug 2 and filling plug 3 to ensure that the oil is drained properly.
- Refit and tighten the drain plugs 1 (tightening torque 34 to 49 N.m).
- Fill up with oil (see: 3 - MAINTENANCE: LUBRICANTS AND FUEL) through filler port 3.
- The level is correct when the oil level is flush with the edge of opening 2.
- Check for any possible leaks at the drain plugs.
- Refit and tighten level plug 2 (tightening torque 34 to 49 N.m) and filler plug 3
(tightening torque 34 to 49 N.m).
- Repeat this operation for the rear axle differential.
647563 (22/08/2017) MT 1435/1440/1840 EASY 75D ST3B S1

Manitou MT 1435 EASY 75D ST3B S1 Specifications

General

Brand	Manitou
Model	MT 1435 EASY 75D ST3B S1
Category	Front End Loaders
Language	English