2 - 39
BOOM SUSPENSION (NOT AVAILABLE)
ATTACHMENT EASY HYDRAULIC CONNECTION (OPTION)
For easy connection and disconnection of hydraulic attachments.
- Press for two seconds on the push-button to release the attachment circuit hydraulic pressure. Screens
and
will be displayed alternately.
- Connect or disconnect the rapid connectors of the hydraulic attachment (see: 4 - OPTIONAL ATTACHMENTS FOR USE
WITH THE RANGE: PICKING UP THE ATTACHMENTS).
REAR FOG LIGHT
Only works when the low beam or main beam lights are switched on. The indicator will light when in use.
FRONT WORKING LIGHTS (OPTION)
ROTATING BEACON LIGHT
NOTE: Except in case of emergency, disabling the rotating beacon light is recommended when the ignition is switched
off to avoid a flat battery.
MENU SCREEN DISPLAY
A flashing light indicates a fault (see: 2 - DESCRIPTION: 6D - SCREEN DISPLAY: MENU SCREEN).
CANCEL OR BACK
VALIDATION
TESTING THE LONGITUDINAL STABILITY LIMITER AND WARNING DEVICE
See: 2 - DESCRIPTION: 7 - LONGITUDINAL STABILITY LIMITER AND WARNING DEVICE.
FAN REVERSAL (NOT AVAILABLE)
MANUAL PARKING BRAKE
The manual or automatic (by default) parking brake can be configured from the OPT menu in the menu screen.
HAZARD WARNING LIGHTS
Enables the L.H. and R.H. Indicators to be switched on simultaneously, with the ignition off.
NOTE: Except in case of emergency, disabling the hazard warning lights is recommended when the ignition is switched
off to avoid a flat battery.
647563 (22/08/2017)
MT 1435/1440/1840 EASY 75D ST3B S1
To Next Page
Loading...
Need help?
General
