Manitou MT 1435 EASY 75D ST3B S1 User Manual

2 - 38
ATTACHMENT CIRCUIT (OPTION)

IMPORTANT

By default, the attachment circuit in continuous mode is disabled as soon as the operator leaves the cab.
This condition can be changed from the OPT menu on the menu screen.
ATTACHMENT CIRCUIT UNLOCKED (by default)
ATTACHMENT CIRCUIT LOCKED
• It is recommended to use this function when the lift truck is not fitted with hydraulic attachment.
ATTACHMENT CIRCUIT IN CONTINUOUS MODE
• The indicator lamp
will light when it is in use.
The operating screen displays the enabled mode. Press the
or button to display the other available mode(s).
NOTE: On stabilisers, the display in zone 2 on the operating screen switches to zone 7.
CHANGE MODE
88°
88
ON TYRES
Press
1
2
1
2
Confirm
88°
88
88°
88
Cancel
88°
88
88°
88
ON TYRES
Press
1
2
1
2
Confirm
88°
88
88°
88
Cancel
88°
88
88°
88
ON TYRES
Press
1
2
1
2
Confirm
88°
88
88°
88
Cancel
88°
88
ADJUSTING THE ATTACHMENT CIRCUIT HYDRAULIC FLOW RATE IN CONTINUOUS MODE
- The
pictogram flashes, and switches to the setting screen
XX %
as soon
as hydraulic flow rate is selected using button A on the attachment hydraulic control.
- Button A forward for positive percentage (+ XX %), backward for negative percentage
(XX %).
- Hold button A in the same position for 4 seconds to confirm the chosen hydraulic
flow rate
i
XX %
.
- Press the
button, or activate button A, to return to the
88°
88
screen
with the flashing pictogram and thus disable continuous mode.
A
647563 (22/08/2017) MT 1435/1440/1840 EASY 75D ST3B S1

Manitou MT 1435 EASY 75D ST3B S1 Specifications

General

Brand	Manitou
Model	MT 1435 EASY 75D ST3B S1
Category	Front End Loaders
Language	English