Manitou MT-X 625 2-E3 Series User Manual

2-25
Kg
Kg
“SUSPENDED LOAD" MODE
USE WITH HOIST (offering a higher safety margin)
- Place the lift truck in the transport position.
- Press the
button, the “SUSPENDED LOAD” MODE is confirmed by a beep and the lighting of the indicator lamp. Hydraulic
tilting movements are disabled, as well as the lifting movement when the longitudinal stability limit is reached (indicator lamp A8 lit).
- Press this button again or switch off the ignition with the ignition key to return to "HANDLING” MODE.
- Protection against forward tip-over
when making aggravating movements is ensured, except when the telescopic boom is retracted.
CONFIGURATION 1
DEVICE STATUS
HALTED TELESCOPE(S) IN RETRACTED POSITION
A4-A5: Very slow intermittent sound alarm.
A6: Slow intermittent sound alarm.
A7: Fast intermittent sound alarm.
A8: Very fast intermittent sound alarm.
- No sound alarm.
NOTE : For AUSTRALIA keep the configuration 1.
CONFIGURATION 2 and 3
DEVICE STATUS
HALTED TELESCOPE(S) IN RETRACTED POSITION
A4-A5: Very slow intermittent sound alarm.
A6: Slow intermittent sound alarm.
A7: Fast intermittent sound alarm.
A8: Very fast intermittent sound alarm.
- No sound alarm.
- Warning light A9 lit.
A9
647421 (22/08/2017) MT-X 625 Série 2-E3 + COMFORT

Manitou MT-X 625 2-E3 Series Specifications

General

Brand	Manitou
Model	MT-X 625 2-E3 Series
Category	Forklifts
Language	English