EasyManuals Logo

Manitowoc convotherm 4 Operating And Installation Instructions

Manitowoc convotherm 4
66 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
2 For Your Safety
Operating and Installation Instructions UL 10
Installation, placing the unit into operation, removing the unit from service, maintenance
When installing and maintaining the combi oven, as well as when placing it into operation or removing
it from service, keep the following hazards in mind and take the actions required in order to eliminate
and/or minimize these hazards:
Risk / hazard Where and in which situations will the
risk/hazard exist?
What to do / safety equipment
Explosion hazard posed
by gas leaks
Whenever the connections are not
disconnected before moving the unit
Make sure to only have gas technicians
from an authorized installation company
work on the gas system
Disconnect the connections
Test the supply line for leaks
Test for leaks inside the unit
Safety device:
Retaining element
Burn and fire hazard
posed by hot combustion
exhaust air
Between the units
Whenever an excessive amount of
heat is produced due to improper as-
sembly
Do not use any gas exhaust system
other than the specified one
Risk of electric shock due
to damaged connection
cable
Whenever transporting the unit
Whenever the connection cable is
routed across sharp sheet metal edg-
es
At the back of the unit
Whenever the unit is on casters
Check the connection cable
Check the connection cable’s routing
Risk of electric shock due
to missing equipment
grounding
On the unit and on neighboring metal
parts
Connect the units to a grounding system
Risk of electric shock
posed by live parts
Whenever replacing the bottom unit’s
dry air intake
Whenever connecting the auxiliary
fans for the top unit’s center adapter
Work on the unit’s electrical compo-
nents should be performed exclusively
by a qualified electrician from an au-
thorized service company
Work professionally
Before removing the covers:
De-energize all connections
Lock out and tag out all switches
Make sure that the unit is
de-energized
Before putting the unit into operation,
make sure that all electrical connections
are undamaged and properly connected
Risk of electric shock due
to moisture entering the
wiring compartment
On the unit
Improper assembly
Follow the instructions to assemble
everything properly

Other manuals for Manitowoc convotherm 4

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Manitowoc convotherm 4 and is the answer not in the manual?

Manitowoc convotherm 4 Specifications

General IconGeneral
BrandManitowoc
Modelconvotherm 4
CategoryKitchen Appliances
LanguageEnglish