6 Installation
Operating and Installation Instructions UL 35
4.a
With several people, carefully place the bottom unit on its back
side on the transport pallet.
Make sure to use appropriate padding in order to protect the
unit (cardboard and styrofoam from the packaging, for exam-
ple).
Do not lift or carry too much weight during the process!
Caution! Risk of injury due to excessive exertion!
4.b
In the case of units with a disappearing door, make sure not to
damage the block on the side.
5.
Use a 6-mm Allen key to remove the four feet.
Safely store the flat washers. You will be reusing them later.
6.
Remove the two left side panel retaining screws at the bottom
of the device
To Next Page
Loading...
Need help?
General
