Part Number STH042 3/14 33
Step 3 To start a cleaning cycle, press the Clean
button. Water will flow through the water dump valve
and down the drain. Wait until the water trough refills,
then add the proper amount of ice machine cleaner to
the water trough.
Wait until the clean cycle is complete (approximately
22 minutes) then press the On/Off button and
disconnect power and water supplies to the ice
machine.
Step 4 Remove parts for cleaning.
Refer to the proper parts removal for your machine.
Continue with step 6 when the parts have been
removed.
Do not mix Ice Machine Cleaner and Sanitizer
solutions together. It is a violation of Federal
law to use these solutions in a manner
inconsistent with their labeling.
Model Amount of Cleaner
U0140 2 ounces (60 ml)
U0190 5 ounces (150 ml)
U0240 5 ounces (150 ml)
U0310 5 ounces (150 ml)
To Next Page
Loading...
Need help?
General