Selecting the input source
1
Press the input source select button to be played back.
USB-DAC: Plays back audio files on the computer.
COAX:
Plays back the device connected to the
COAXIAL connector.
OPT1:
Plays back the device connected to the
OPTICAL 1 connector.
OPT2:
Plays back the device connected to the
OPTICAL 2 connector.
iPod/USB: Plays back an iPod or USB memory device.
ANALOG 1:
Plays back analog audio signals input to the
ANALOG1 connector.
ANALOG 2：
Plays back analog audio signals input to the
ANALOG2 connector.
0
You can also select the input source by turning INPUT SELECTOR on the main
unit.
Adjusting the volume
1
Press VOLUME df to adjust the volume.
0
You can also adjust the master volume by turning VOLUME on the main unit.
Turning off the sound temporarily
(Muting)
1
Press MUTE :.
“MUTE ON” appears in the display.
0
To cancel mute, press MUTE : again.
Contents Connections Playback Settings Tips Appendix
28
Front panel Display Rear panel Remote Index
To Next Page
Loading...
