Marantz Icemaker - Standby Pcb; Trans Power

6. STANDBY PCB
Proceeding : TOP COVER → STANDBY PCB
(1) Remove the connector wires. Remove the screws.
7. TRANS POWER
Proceeding : TOP COVER → TRANS POWER
(1) Cut the wire clamper and remove the connector wires. Remove the screws.
N8501
N8507
N8503
N8505
N8502
STYLE PIN
PCB HOLDER
N8504
N8001
N8504
N8301
N8505
CUT
STYLE PIN
17