EasyManua.ls Logo

Marantz Icemaker - Microprocessor, Etc.; Procedure after Replacing the Microprocessor, Etc; Firmware Update Procedure

Marantz Icemaker
86 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PROCEDURE AFTER REPLACING THE MICROPROCESSOR, ETC.
The procedure after replacing the u-COM (microprocessor), ash ROM, etc. is as follows.
PCB Name Ref. No. Description
Procedure
after
Replacement
Remark
DIGITAL U0101 M3062LFGP C
Procedure after Replacement
A : The software has been written. The software is not written at the time of replacement.
B : The software has been written. The software may need to be rewritten by version updates. Check the version.
C : The software has not been written. The software needs to be written after replacement.
See "
Firmware Update Procedure
" for information on writing the software.
D : The software has been written. Be sure to rewrite with the latest software for your service region.
See "
Firmware Update Procedure
" for information on writing the software.
FIRMWARE UPDATE PROCEDURE
1. Items to be Prepared
(1) PC OS is Windows7(32bit or 64bit)
(2) RS-232C cable (9P (Male), Straight).
(3) 00DSPK-581:WRITING KIT.
606050028012P:7P FFC (Straight)
(4) Writing tools and some les. (FLASHSTA.exe, Update le.)
22

Table of Contents

Related product manuals