Marantz M-CR510 - Speaker Response settings

70
Appendix
TipsPlaybackConnections
Contents
Front panel Rear panel IndexRemote
Settings
Clock
2 Set the current time
You can automatically adjust the clock of this unit using the Internet.
%
•To use this function, the unit must be connected to the Internet.
1
Use ui to select your time zone, then press ENTER.
2
Use ui to select the DST (Daylight Saving Time), then
press ENTER.
On : Set the DST (Daylight Saving Time) to on.
O (Default) : Set the DST (Daylight Saving Time) to o.
Speaker Response
Set the output frequency characteristics.
Flat (Default) : Properties are flat.
Response 1 : Cuts low frequencies 60 Hz or under by –12 dB/oct.
Response 2 : Cuts low frequencies 100 Hz or under by –12 dB/oct.
Response 3 : Cuts low frequencies 60 Hz or under by –12 dB/oct. Also,
raises the 400 Hz region by 3 dB.
Response 4 : Cuts low frequencies 100 Hz or under by –12 dB/oct. Also,
raises the 400 Hz region by 3 dB.
%
•Speaker Response setting values are not reflected in headphone out or subwoofer
out.