Marantz NR1605/U1B - 1.10. About the error code

1.10. About the error code
See the table below for error codes and details of faults when the rmware is updated through USB memory.
Error
Code
Details of Error code Display Coping strategies
01 Unable to detect USB.
C o n n e c t i o n F a i l 0 1
Disconnect and connect the USB mem-
ory.
02 No Firmware File in USB.
F i l e s N o t F o u n d 0 2
Make sure that the Firmware File is in
the USB memory.
03
Firmware File in USB for unsup-
ported Model name/area.
N o t M a t c h F i r m 0 3
Check the supported Model name/area
for the Firmware File.
04
Failed to obtain individual Firm-
ware information.
C o n n e c t i o n F a i l 0 4
Start the USB Update again.
05
Time Out while obtaining individ-
ual Firmware information.
C o n n e c t i o n F a i l 0 5
Start the USB Update again.
06
Failed to obtain entire Firmware
information.
C o n n e c t i o n F a i l 0 6
Start the USB Update again.
07
Time Out while obtaining entire
Firmware information.
C o n n e c t i o n F a i l 0 7
Start the USB Update again.
08
Error notication received while
requesting Firmware Info.
C o n n e c t i o n F a i l 0 8
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for ve seconds.
09
Time Out while obtaining Firm-
ware information.
C o n n e c t i o n F a i l 0 9
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for ve seconds.
0A
Unable to detect USB for Firm-
ware Download.
C o n n e c t i o n F a i l 0 A
Disconnect and connect the USB mem-
ory.
0B
No Firmware File for Firmware
Download.
F i l e s N o t F o u n d 0 B
Disconnect and connect the USB mem-
ory.
0D
Received value with invalid Pack-
age Version.
C o n n e c t i o n F a i l 0 D
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for ve seconds.
10
No Update Packet received from
CX870 (Time Out).
U p d a t i n g f a i l 1 0
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for ve seconds.
11
Abnormal data in Update Packet
received from CX870 (CRCError).
U p d a t i n g f a i l 1 1
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for ve seconds.
12
Abnormal data in Update Packet
received from CX870 (PacketNo-
Error).
U p d a t i n g f a i l 1 2
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for ve seconds.
60