Marantz NR1606/U1B - 1.3. File Structure on USB Memory; 1.5. Start the Update

1.3. File structure on USB Memory
Copy the update les to the USB memory with the following structure.
USB memory root
Model Name Model Area Product ID
NR1606U North America (U) 100100400100
NR1606N Europe (N) 100100400200
NR1606K China (K) 100100400500
NR1606F Japan (JP) 100100400400
+ rmwares
+ X00100XXXXXX
+ APLD.bin
+ DSP.bin
+ enc_update.xml
+ GUI.bin
+ IMG.bcd
+ MAIN.bin
+ SBL.bcd
1.4. Insert the USB memory into the USB port.
NOTE : Remove the LAN cable from this unit when performing updates.
1.5. Start the update.
While holding down buttons "
DIMMER
" and "
SOUND MODE
" simultaneously, press the power button to turn on the
power.
1.6. Display during USB update
After around half minutes, display shows the following message.
Display
FLD
U S B U p d a t e S t a r t
1.7. Press the "ENTER" key on the remote control unit or this unit.
Then start Firmware Update.
Display
FLD
U p d a t e F i l e C h e c k
Download firmware
in USB flash drive.
54