13
6. Select Port
ƔǒዓƢǔ
Serial Port
ဪӭǛᢠƼŴǯȪȃ
ǯƠLJƢŵ
Next
ǛǯȪȃǯƠLJƢŵ
7. "Enter the CPU crystal frequency for the selected de-
vice:"
ƴ
8.0
ƱλщƠLJƢŵ
Next
ǛǯȪȃǯƠLJƢŵ
8. Select Connection:
Ɣǒ
BOOT Mode
ƴȁǧȃǯǛλǕ
LJƢŵ
Select Baud rate:
Ɣǒ
19200
ǛᢠƼŴ
Next
ǛǯȪȃǯƠ
LJƢŵ
ද
:
Use Default Baud Rate
ƴ
ȁǧȃǯƕλƬƯƍǔƱ
Baud Rate
Ǜ٭ưƖLJƤ
ǜƷưȁǧȃǯǛٳƠƯƘƩ
ƞƍŵ
6. Choose the Serial port No. in the Select Port.
Click Next.
7. 8.0 is inputted into the "Enter the CPU crystal frequency
for the selected device:". Click Next.
8. Check the BOOT Mode in Select Connection.
Choose the 19200 in Select Baud rate. Click Next.
Remark :
Please remove check
mark, if it is contained
in Use Default Baud
Rate.
To Next Page
Loading...
Need help?
General
