Marantz PM-15S1 Service Manual

3
ૠƸᲢᲣưƢ
This is an example
DISPLAY button DISPLAY ATT button
POWER ON/OFF button
4. SERVICE MODE
1. To enter the Service Mode, press the POWER
ON/OFF button with pressing the DISPLAY and ATT
buttons to turn on the unit. (Or when the remote code
"166363" is received while power is ON.)
When into the Service Mode, the memory is cleared
and the unit is initialized.
2. The Model name and Version number are displayed
on the Front LCD.
Whenever press the DISPLAY button, the display
changes as follows.
Turn off power to quit service mode.
THE TRIM CHECK MODE
1. Press TONE button. (1 st)
Volume Level is displayed .
After, whenever press the TONE button, TRIM adjust-
ment function works and output level changes accord-
ing to the display.
Whenever press the TONE button, the display chang-
es as follows and output level changes according to
the display.
TRIM check mode is completed.
1.
ஜ˳Ʒ
DISPLAY
ȜǿȳƱ
ATT
ȜǿȳǛƠƳƕǒ
POW ER ON/OFF
ȜǿȳǛƠLJƢŵ
Ტ
LJƨƸŴᩓเ
ON
ɶƴȪȢdzȳdzȸȉ
"166363"
ǛӖ
ƠLJƢŵᲣƜǕưǵȸȓǹȢȸȉƴλǓLJƢŵ
දᲴǵȸȓǹȢȸȉƴλǔƱŴμƯƷᚨܭƕǯȪǢƞǕЈᒵ
ཞƴƳǓLJƢŵ
2.
ڼNJƴȢȇȫӸŴȐȸǸȧȳƕᘙᅆƞǕLJƢŵ
DISPLAY
ȜǿȳǛƢƨƼƴɦᚡƷᘙᅆƱƳǓLJƢŵ
POWER ON/OFF
ȜǿȳǛƠŴᩓเǛЏǔƱǵȸȓǹ
ȢȸȉƕᚐᨊƞǕLJƢŵ
TRIM
TRIM
ȁǧȃǯȢȸȉ
ȁǧȃǯȢȸȉ
1.

TONE
ȜǿȳǛƠLJƢŵᲢ
1
ׅႸᲣ
ȇǣǹȗȬǤƴ᪦᣽ƕᘙᅆƞǕLJƢŵ
ˌᨀŴ
TONE
ȜǿȳǛƢƝƱƴȈȪȠᛦૢೞᏡƕ΁Ɩᘙ
ᅆƴࢼƍЈщȬșȫƕ٭҄ƠLJƢŵ

TONE
ȜǿȳǛƢƝƱƴɦᚡƷǑƏƴᘙᅆƕ٭ǘǓŴᘙ
ᅆƴࢼƍЈщȬșȫƕ٭ǘǓLJƢŵ
TRIM
ȁǧȃǯȢȸȉƸኳʕưƢŵ

Marantz PM-15S1 Specifications

General

Brand	Marantz
Model	PM-15S1
Category	Amplifier
Language	English