Marantz PM6006 - No sound comes out; Desired sound does not come out

o
No sound comes out
Symptom Cause / Solution Page
No sound comes out of
speakers.
0
Check the connections for all devices. 16
0
Insert connection cables all the way in. －
0
Check that input connectors and output connectors are not reversely connected. －
0
Check cables for damage. －
0
Check that speaker cables are properly connected. Check that cable core wires come in contact with the
metal part on speaker terminals.
17
0
Securely tighten the speaker terminals. Check speaker terminals for looseness. 17
0
Check that the proper input source is selected. 27
0
Adjust the master volume. 27
0
Cancel the muting mode. 27
0
Check the settings of the SPEAKERS A/B button. 27
The COAXIAL or OPTICAL
1/2 input indicator is
flashing.
0
Check the connection of the Coaxial digital cable or Optical cable. 22
0
Set the Digital Audio output signal of the connected device to 2 channel linear PCM. 42
o
Desired sound does not come out
Symptom Cause / Solution Page
No sound comes out of a
specific speaker.
0
Check that speaker cables are properly connected. 17
0
Adjust the BALANCE control knob. 27
The left and right of stereo
sound is reversed.
0
Check whether the left and right speakers are connected to the correct speaker terminals. 17
Contents Connections Playback Settings Tips Appendix
40
Front panel Rear panel
Remote control
unit
Index