Setting the Auto Standby mode
You can set the unit to automatically switch to standby mode if the unit is
not operated for 30 minutes when there is no audio input (Auto Standby
mode).
Auto Standby mode is set to on by default.
.
Power indicator
SOURCE DIRECT
Turning Auto Standby mode off
1
Press and hold SOURCE DIRECT for more than 5
seconds to turn the Auto Standby mode off.
The power indicator flashes once.
Turning Auto Standby mode on
1
Press and hold SOURCE DIRECT for more than 5
seconds to turn the Auto Standby mode on.
The power indicator flashes three times.
Contents Connections Playback Settings Tips Appendix
32
Front panel Rear panel
Remote control
unit
Index
To Next Page
Loading...
