Marantz SACD 10 - Playing Files Stored on USB Flash Drives

Playing files stored on USB flash drives
1
Connect the USB flash drive to the USB port.
(v p. 24)
2
Press USB to switch the input source to “USB”.
0
When the setup menu’s “Resume Play” (v p. 57) is on, playback starts
automatically.
3
Press BACK button.
The file/folder list appears in the display of this unit.
0
The file/folder list can also be displayed by pressing i to stop the playback.
4
Use Cursor Up/Down buttons to select the folder to be
played, then press ENTER.
5
Use Cursor Up/Down buttons to select the file to be
played, then press ENTER.
Playback starts.
Operation buttons
Function
p
Playback / Pause
i
Stop
k j
Skip to previous track / Skip to next track
(Press and hold) Fast-reverse / Fast-
forward
BACK Moving up a level in the folder tree
Cursor Up/Down Select the item
ENTER Enter the selected item / Playback
OPTION Select the playback range
s
Random playback
r
Repeat playback
0
Switching between All-track repeat and
Single-track repeat.
INFO
Switch the display between the album
name and the file format
0
To start playing another file during playback of a USB flash drive, first press BACK
to display the file tree. Next, use Cursor Up/Down buttons to select the file to be
played and press ENTER.
Contents Connections Playback Settings Tips Appendix
41
Front panel Rear panel Remote control
unit
Index