Disabling amplifier operating mode
1
Press and hold AMP and SETUP simultaneously until
the remote mode select indicators flash green.
0
Each time you perform Step 1, the amplifier operating mode is
toggled between enabled/disabled.
Disabling streaming preamplifier
operating mode
1
Press and hold LINK and SETUP simultaneously until
the remote mode select indicators flash green.
0
Each time you perform Step 1, the streaming preamplifier
operating mode is toggled between enabled/disabled.
Contents Connections Playback Settings Tips Appendix
60
Front panel Rear panel Remote control
unit
Index
To Next Page
Loading...
