A
Power (X) button/indicator
0
This turns the power on/off (standby). (v p. 30)
0
This is lit as follows according to the power status:
0
Power on : White
0
Standby : Off
0
When the protection circuit is activated : Orange (blinking)
B
Illumination
This illuminates when the power is turned on. Brightness can be
changed and lighting turned off.
0
“Turning the illumination and display on/off” (v p. 32)
0
“Illumination” (v p. 58)
C
DIMMER button
This switches the brightness of the display. (v p. 31)
D
Stop button (i)
Press this button to stop during playback.
E
Disc tray open/close button (q)
Opens and closes the disc tray. (v p. 33)
F
Display
Various information is displayed here.
G
Disc tray
Used to insert a disc.
H
Remote control sensor
This receives signals from the remote control unit. (v p. 6)
I
Reverse-skip button (k)
Press this button during playback to restart the current track or play the
previous track.
J
Play/Pause button (p)
Press this button to pause during playback. If pressed while paused or
stopped, resumes playback.
K
Forward-skip button (j)
Press this button during playback to play the next track.
Contents
Connections Playback Settings Tips Appendix
8
Front panel Rear panel Remote control
unit
Index
To Next Page
Loading...
