Dual backup memory function
The unit stores settings information in nonvolatile memory even when the
main power supply is turned o. Using the Dual Backup Memory function,
you can write settings information to another memory area to back up
saved settings for recovery anytime as needed. Remembering set details
(Backup).
DISPLAYPRESET CH +
PRESET CH –
Remembering set details (Backup)
1
Set the unit in the state you want remembering, and
press and hold PRESET CH + and PRESET CH – for at
least 3 seconds.
“MEMORY SAVING” is shown in the display, and the setting details
are remembered.
%
•The volume is not remembered.
•If remembered details are overwritten, the previously remembered contents are
deleted.
Recalling remembered details
(Recovery)
1
Press and hold PRESET CH + and DISPLAY together for
at least 3 seconds.
“MEMORY LOAD” is shown in the display, and the remembered
details are recalled.
%
•If there is no remembered data, “NO BACKUP” is shown in the display, and no
remembered details are recalled.
•As the volume cannot be recalled, it returns to the factory setting volume.
To Next Page
Loading...
