Marantz SR6008 - Manual Setup; Main Speakers

172
Appendix
TipsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Settings
Manual Setup
Perform when setting the speakers manually or when changing settings
made in Audyssey® Setup.
•If you change the speaker settings after performing Audyssey® Setup, it
will not be possible to select Audyssey MultEQ® XT, Audyssey Dynamic
EQ® and Audyssey Dynamic Volume® (vpage149, 150).
•“Manual Setup” can be used without changing the settings. Please set
if necessary.
Amp Assign
Select power amplifier usage method to match your speaker system.
2 Assign Mode
Select power amplifier usage method.
Main Only (Default) : Setting for 7.1-channel playback using surround
back, front height, or front wide speakers.
ZONE2 : Setting to assign the unit’s built-in power amplifier for ZONE2
and output the audio in stereo.
Bi-Amp : Setting to use the front speakers via the bi-amp connection.
Front B : Setting to use the second set of front speakers for playback.
You can switch the speaker to be used as the “Front
Speaker” (vpage178) between Front speaker A and B.
2 Main Speakers
Selects speakers used in MAIN ZONE.
Front Height (Default) : Uses front height speakers.
Front Wide : Uses front wide speakers.