Marantz SR6008 - Resetting Factory Settings

208
Appendix
SettingsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Tips
Resetting factory settings
Perform this procedure if the display is abnormal or if operations cannot be performed.
Various settings are reset to the factory default values. Make settings again.
X
ZONE2 SOURCE
M-DAX
1
Turn o the power using X.
2
Press X while simultaneously pressing ZONE2 SOURCE
and M-DAX.
3
Once the display starts flashing at intervals of about 1
second, release the two buttons.
%
•If in step 3 the display does not flash at intervals of about 1 second, start over
from step 1.