Marantz SR9600 - Status Request and Status Answer List; Normal Status Request and Status (Answer and Feedback) List

SR9600 RS-232C Control Specification Page: 18 / 25
Document Version [1.0]
Company Restricted
5-2. Status request and Status answer list
5-2-1. Normal Status request and Status (answer and feedback) list
Status request Status answer and feedback
OFF “PWR:1”
POWER “PWR:?”
ON “PWR:2”
OFF “ATT:1”
AUDIO ATT “ATT:?”
ON “ATT:2”
OFF “AMT:1”
AUDIO MUTE “AMT:?”
ON “AMT:2”
OFF “VMT:1”
VIDEO MUTE “VMT:?”
ON “VMT:2”
VOLUME “VOL:?”
Volume value = xxxy
(see command list)
“VOL:xxxy”
(+18.0 ~ -80.0dB)
TONE BASS “TOB:?”
Bass value = xxx
(see command list)
“TOB:xxx”
TONE TREBLE “TOT:?”
Treble value = xxx
(see Command List)
“TOT:xxx”
SOURCE Select “SRC:?”
Video+Audio source
(see Command List)
“SRC:va”
(v ,a= ‘0’ ~ ‘Z’)
(v = video, a = audio.)
OFF “71C:1”
7.1 Channel Input “71C:?”
ON “71C:2”
ANALOG “ISG:1”
DIGITAL “ISG:2”
iLINK “ISG:3”
INPUT SIGNAL “ISG:?”
HDMI “ISG:4”
SPEAKER Select “SPK:?”
Speaker status = ab
a = SPKR-A, b = SPKR-B
“SPK:ab”
a,b (1 = OFF, 2 = ON)
Status request Status answer and feedback
SLEEP “SLP:?” Sleep time (xx = 00 ~ 90) “SLP:xx”
OFF “MNU:1” ( Not on Menu)
MENU “MNU:?”
ON “MNU:2” (On Menu)