Marantz SR9600 - 4 Recommendations of Command, Status and Layer Definition

SR9600 RS-232C Control Specification Page: 8 / 25
Document Version [1.0]
Company Restricted
4. Recommendations of Command, Status and Layer definition
- All Commands, Statuses and Layers will be defined other specific document.
- [MANDATORY] The product MUST have Commands and the Statuses same as a remote controller buttons (IR
controller) of the product.
- All Commands are required working by discreate as ON/OFF commands. (It means that do not support TOGGLE
command only. )
- All Commands and Statuses are defined same chharacter size except ACK/NAK on the product. ( Recommended
character length : 3~6 characters )
-
It permits attaching 0x0A character to a reply characters from the product. In this case, must suppose that the object is
followed altogether.
- Recommend to supports numbers or values direct setting command, if it has variable numbers or values.