Marantz SR9600 - 5 Definitions of Command, Status and Layer; Commands; Normal Command List

SR9600 RS-232C Control Specification Page: 9 / 25
Document Version [1.0]
Company Restricted
5. Definitions of Command, Status and Layer
This section is told how to define “Command”, “Status” and “Layer” of this product.
5-1. Commands
This chapter will show the commands of this product.
5-1-1. Normal Command list
Command Reply from Slave
TOGGLE “PWR:0”
OFF “PWR:1”
POWER
ON “PWR:2”
“PWR:1”,
“PWR:2”
TOGGLE “ATT:0”
OFF “ATT:1”
AUDIO ATT
ON “ATT:2”
“ATT:0”, (None)
“ATT:1”, (OFF)
“ATT:2” (ON)
TOGGLE “AMT:0”
OFF “AMT:1”
AUDIO MUTE
ON “AMT:2”
“AMT:1”,
“AMT:2”
TOGGLE “VMT:0”
OFF “VMT:1”
VIDEO MUTE
ON “VMT:2”
“VMT:1”,
“VMT:2”
VALUE “VOL:0xxxy”
UP “VOL:1”
DOWN
“VOL:2”
UP-FAST
“VOL:3”
VOLUME
DOWN-FAST “VOL:4”
“VOL:xxxy”
xxx = vol. value as +18~-80db,
y = .0 or .5 db
00.0 = ”VOL: 000”,
-∞ = “VOL:-ZZZ”
VALUE “TOB:0xxx”
UP “TOB:1”
TONE BASS
DOWN “TOB:2”
“TOB:xxx”
xxx = vol. value as +06 ~-06
VALUE “TOT:0xxx”
UP “TOT:1”
TONE TREBLE
DOWN “TOT:2”
“TOT:xxx”
xxx = vol. value as +06 ~-06
TV “SRC:1”
DVD “SRC:2”
VCR1 “SRC:3”
VCR2 “SRC:4”
DSS “SRC:5”
LD “SRC:6”
AUX1 “SRC:9”
AUX2 “SRC:A”
CD “SRC:C”
CD-R “SRC:D”
TAPE “SRC:E”
TUNER1 “SRC:F”
FM1 “SRC:G”
AM1 “SRC:H”
TUNER2 “SRC:J”
FM2 “SRC:K”
AM2 “SRC:L”
SOURCE Select
“SRC:va”, (v ,a= ‘0’ ~ ‘Z’)
(v = video, a = audio.)
v = 0 (V-OFF)
a = N (7.1CH)
TOGGLE “71C:0”
OFF “71C:1”
7.1 Channel Input
ON “71C:2”
“71C:1”,(OFF)
“71C:2”(ON)