Need help?Do you have a question about the Marathon Electric DVR 2000E+ and is the answer not in the manual?
Highlights the main functionalities including regulation modes, sensing capabilities, and interfaces.
Details the safety and shutdown mechanisms implemented in the regulator for system protection.
Lists critical protection parameters like over-voltage, over-excitation, and current limits.
Lists and briefly describes all safety and shutdown features of the regulator.
Details how to physically mount the DVR®2000E+ unit to the generator.
Explains the terminal connections and wiring requirements for proper setup.
Details settings within tabs like Operating Modes, Set Points, and Protection.
Provides steps to diagnose and resolve problems like voltage buildup and low output.
Step-by-step instructions for initial regulator programming via the HMI.
General| Frequency | 50/60 Hz |
|---|---|
| Regulation | ±1% |
| Protection Class | IP20 |
| Control Method | V/Hz Control |
| Enclosure Type | NEMA 1 |
| Operating Temperature | -10 to 50°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 5% to 95% (non-condensing) |
| Altitude | Up to 1000m without derating |
To Next Page
