Marco Uber Boiler - Page 14

14
Service manual April 2017 Uber boiler
2. The second line shows the live readout of:
• Tank temperature in PRIME mode,
• Font temperature in BOOST mode.
3. Third line shows the timer
• Clicking TIMER button turns on and off the timer clock.
• Pressing it for longer than 2 seconds resets it and turns it off.
4. Fourth line shows measured weight, scaled in grams.
• Numbers above 9999 can NOT be displayed – “----“ will be shown instead.
• Negative numbers will be shown with minus sign (down to -9999).
• Pressing WEIGH button will reset scale to zero.
• Please note that the max weight for the load cell is 4kg and any loads higher than 9kg
may destroy it.
NOTE: Because the boiler is electronically controlled, no priming is necessary.
The element cannot switch on until a safe level of water is reached.
WARNING: ALWAYS ENSURE THE DIAL IS SET TO OFF BEFORE PRESSING BOOST
OR HOT WATER WILL
FLOW IMMEDIATELY.
Off
On
The Font Dial operates anticlockwise
to begin the flow of water.