EasyManua.ls Logo

MAREX MX755 - Troubleshooting

MAREX MX755
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 36
TROUBLESHOOTING
If you have problems with the system, there is often a quick and simple solution. Please try the following:
Problem Solution
No video from a camera
1. Check all connections to the camera. Make sure the adaptor
is plugged in.
2. Make sure that the receiver is ON.
3. Make sure that the camera is in range of the receiver.
4. Make sure that the camera and the monitor are paired. (see
page 18)
The video is dropping
1. Move the camera closer to the receiver.
2. Try repositioning the camera, receiver or both to improve
the reception.
Audio problems
1. Increase the volume when there is no sound.
2. Make sure that there is sound within range of the camera
microphone.
3. If the monitor emits a loud screeching noise (audio
feedback), move the camera and monitor further apart.
The picture is or has become choppy The picture may become choppy when experiencing a lower
frame rate (i.e. 10 frames per second vs. a higher 25 frames per
second).
Try moving the camera closer to the receiver. Remove
obstructions between the receiver and camera.
Recording Problems 1. Make sure the SD card is correctly inserted in the SD card
slot.
2. Make sure the SD card’s memory is not full.
3. Make sure the size of the SD card is compatible with the
system. The system can support SD cards up to 128GB.
EN