Mark 7 1050 PRO Autodrive - Table of Contents; Important Safety Instructions

MARK 7® RELOADING 1050 USER MANUAL VERSION 9.3, COPYRIGHT 2020 ALL
RIGHTS RESERVED
3
Storage Recommendations ......................................................................................................................... 70
Reloading Manual ....................................................................................................................................... 71
Ensuring proper system operation ............................................................................................................. 71
Calibration ................................................................................................................................................... 71
Test Rounds................................................................................................................................................. 71
Digital Clutch Setting ................................................................................................................................... 72
..................................................................................................................................... 73
Communications Errors .............................................................................................................................. 75
Troubleshooting ........................................................................................................................................ 76
Important Safety Instructions
Read this manual completely prior to installation and operation. Understand all safety and operating
instructions. Failure to comply with the WARNINGS and instructions may result in serious injury or death.
WARNINGS throughout this manual will be symbolized by the yellow WARNING symbols seen below.
WARNING – Activities using the Mark 7® 1050 Autodrive are inherently dangerous and may lead to injury
and even death. Actions as a result of using the Mark 7® product are solely the responsibility of the user
– if you get injured through the reloading process or through the use of ammunition as a result of the
reloading process it is your fault.
WARNING - Mark 7® equipment should only be operated by trained personnel that follow all safety
precautions. Failure to do so could result in serious injury or death.