WARNING - This product is designed to be used by reloading personnel in conjunction only with a fully
functioning and well lubricated Dillon 1050 reloading press. Its use should be limited to experienced
personnel only. All personnel using this equipment are assumed to have prior experience setting up and
operating a Dillon 1050 reloading press. This document contains basic operating and maintenance
instructions only.
WARNING - Never leave your Mark 7® Autodrive unattended while it is operating.
WARNING – Never run the Mark 7® Autodrive without the belt guard fully attached to the baseplate.
WARNING – Never operate the Mark 7® Autodrive unless it is completely within Dillon Precision factory
specifications and is operating within factory parameters. This includes the shell plate locating pins and
other machine-specific features. Read and understand the latest Dillon Precision 1050 manual for your
make and model machine and ensure that you fully understand the Dillon directions.
Never operate the Mark 7® Autodrive with any third party accessories that substantially change the
operation of the Mark 7® Autodrive
WARNING – Never operate the Mark 7® Autodrive while impaired.
WARNING – Never operate that Mark 7® Autodrive without using high quality brass and always use
sufficient lubrication on your brass while operating the Mark 7® Autodrive.
To Next Page
Loading...
