EasyManua.ls Logo

Mark 7 1050 PRO Autodrive - Page 5

Mark 7 1050 PRO Autodrive
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MARK 7® RELOADING 1050 USER MANUAL VERSION 9.3, COPYRIGHT 2020 ALL
RIGHTS RESERVED
5
WARNING The Mark 7® Autodrive is designed to help automate the process of loading and processing
of ammunition. Never operate the Mark Autodrive at speeds higher than you have tested and are
comfortable with for the type of reloading or processing that you are undertaking. Run the Mark 7®
Autodrive at the slowest possible setting to create quality ammunition.
WARNING Always wear protective eyewear to protect eyes from being injured. Flying debris may result
when using this equipment. Always wear protective clothing that covers arms, legs and neck to protect
from injury.
It is the responsibility of the user to insure that appropriate protective clothing and equipment are used
to provide protection from those hazards to which personnel are exposed or could be exposed while
working with this product. Failure to do so could result in serious injury or death

Related product manuals