What to do if I see 'Err Fan' on my Martin DJ Equipment?
If you see 'Err Fan', it indicates that the fan is not running or there is no connection. You should check the fan and its connections to resolve this issue.
What to do if I see 'Err Focus' on my Martin DJ Equipment?
If you see 'Err Focus', it means the focus lens hall sensor has a read error. Check the hall sensor, motor, connection, and magnet.
What to do if I see 'Err Color wheel' on my Martin DJ Equipment?
If you see 'Err Color wheel', it indicates a color wheel hall sensor read error. You should check the hall sensor, motor, connection, and if the magnet is missing.
What to do if I see 'Err Gobo Wheel' on my Martin DJ Equipment?
If you see 'Err Gobo Wheel', it signals a gobo wheel rotation hall sensor read error. Check the hall sensor, gobo wheel motor, connection, and for a missing magnet.
What to do if I see 'Err Prism Wheel' on my Martin DJ Equipment?
If you see 'Err Prism Wheel', it indicates a prism wheel hall sensor read error. Check the hall sensor, prism wheel motor, connection, and for a missing magnet.
What to do if I see 'Err Animation' on my Martin DJ Equipment?
If you see 'Err Animation', it means there's an animation hall sensor read error. You should check the hall sensor, motor, connection, and if the magnet is missing.
What to do if I see 'Err Prism/Frost' on my Martin DJ Equipment?
If you see 'Err Prism/Frost', it means there is a prism and frost wheel hall sensor read error. Check the hall sensor, motor, connection, and for a missing magnet.
What to do if I see 'Err Gobo ind/rot' on my Martin DJ Equipment?
If you see 'Err Gobo ind/rot', it indicates a gobo index rotation hall sensor read error. Check the hall sensor, gobo index rotation motor, connection, and for a missing magnet.
What to do if I see 'Err Prism rot' on my Martin DJ Equipment?
If you see 'Err Prism rot', it means there is a prism rotation hall sensor read error. Check the hall sensor, motor, connection, and for a missing magnet.
Why does my Martin DJ Equipment show 'Err Prism ind/rot'?
The 'Err Prism ind/rot' error indicates a prism rotation hall sensor read error. To resolve this, check the hall sensor, prism wheel motor, connection, and ensure the magnet is present.
General| Warranty | 2 years |
|---|---|
| Color Temperature | 6500K |
| Control | DMX, RDM |
| Input Voltage | 100-240V AC, 50/60Hz |
| Color Reproduction | Full RGB spectrum |
| Operating Temperature | -20°C to 45°C |
To Next Page
