11 © 2010 Martin Professional A/S
Martin M1 Safety and Installation Guide
Specifications
Physical
Length: 823 mm
Width: 464 mm
Height, screen closed: 178 mm
Height, screen opened 395 mm
Weight: 14.4 kg
Operating Temperature: 0° - 40° Celsius
IP Rating: IP20
Connections
- Front: 2 x USB host socket
- Front panel: 1 x USB host socket
- Rear:
- AC power input: I.E.C. male socket
- AC power output: I.E.C. female socket
(Total current draw of all devices linked via AC power outlet: max. 4A)
- Midi (optional) : DIN-5 female socket (Midi in, thru, out)
- Mouse, keyboard: PS2 socket
- EtherDMX data: RJ-45 socket (does not accept Neutrik EtherCon connectors in housing)
- Remote Network data: RJ-45 socket (does not accept Neutrik EtherCon connectors in housing)
- USB: 4 x USB device socket
- Serial: 9-pin D-Sub male
- VGA: 15-pin D-Sub female
- Sound: 3.5 mm audio phone jack + SPDIF
- DVI
- DMX-out data (full RDM): 4 x 5-pin locking XLR female socket
- DMX-in data: 5-pin locking XLR male socket
- LINK USB data outputs: 2 x Neutrik RJ-45 socket
(accepts Neutrik EtherCon connectors in housing)
- LAMP output: 2 x 3-pin locking XLR female socket
Electrical:
AC-Power: rated 100-240V 50/60Hz, operates over 90-264V 50/60Hz
Power supply unit: Auto-sensing Switchmode
Main fuses: Two 2AT (slow blow) (CAUTION: DOUBLE POLE/NEUTRAL FUSING)
Total current draw of all devices linked via AC power outlet: max. 4A
Lamp output: 2 x 12V PWM
Total Current: Max. 0.75 A
Total Power: Max. 80 W
Hardware
Industrial 13.1” TFT 16:9 touch screen (1280x800 pixel)
Internal SATA 2.5” hard disk drive
Industrial motherboard with Intel processor
2GB RAM
Integrated Graphics
2 x dimmable XLR desk lamp connections
To Next Page
Loading...
