7 © 2010 Martin Professional A/S
Martin M1 Safety and Installation Guide
Setup and Assembly
Unpacking
Open the shipping box carefully and stow away all included foam pieces and protective covers. Store
them for re-use.
The M1 should never be shipped in any other container than the factory-provided box or a custom
manufactured protective case.
Placement
The M1 controller requires a stable mounting position that provides support for all 4 rubber feet on the
bottom of the console.
Place the console carefully onto the surface and fold open the attached screen.
Apply some weight with a hand on the rubber hand rest when operating the hinge mechanism. The
hinges are strongly damped and the controller could tip over if the screen is not opened carefully.
To Next Page
Loading...
