9 © 2012 Martin Professional A/S
Martin M2GO and M2PC Safety and Installation Guide
Setup and Assembly
Unpacking
Open the shipping box carefully and keep all included pieces and protective covers for re-use.
Do not transportnthe M2GO / M2PC in any other container than the factory-provided cardboard box
with the original protective packaging inserts or a professionally designed protective case.
The console is provided with a protective clip-on cover. Remove the cover carefully before powering up
the system.
The cover can be conveniently placed underneath the console during operation.
Placement
The controller requires a stable mounting position that provides support for all 4 rubber feet on the
bottom.
Never place the controller onto a blanket or other soft surface as this would block the ventilation
openings and cause overheating that will shut down the internal processor and possibly damage the
controller.
To Next Page
Loading...
Need help?
General
