26
Verify the following after installation or servicing of the light:
All manuals are present.
All labels are present and legible.
No mechanical damage on new installations.
The arm is balanced and the friction adjustment is adjusted so that the light
has no noticeable drift in the upper and lower positions.
If ceiling mount or track mount, check the column at the tripod, trolley and arm adapter that
the roll pin is installed to prevent the column from unscrewing. Check all set screws.
The light can be moved and positioned freely without any drifting.
The light is connected to the appropriate power source.
Dispose of all light parts and internal components per applicable codes, regulations
and directives.
The dimmer switch works on all available settings (low, medium, and/or high).
CHECKLIST
To Next Page
Loading...
