Masai K50 - Handlebar; Throttle Cable; Rear Brake Lever

18 Handlebar
18.1 Throttle cable
• Remove the screws from the throttle
housing cover
• Remove the throttle housing.
• Remove the right handle bar grip from
the handlebar.
• Disconnect the throttle cable.
• Now you can remove the throttle lever.
Figure 76: Throttle cable
18.2 Rear brake lever
• Disconnect the rear brake cable.
• Remove the handlebar grip.
• Disconnect the handlebar switch.
• Remove the handlebar switch holder by
removing the two screws.
• Remove the handlebar grip.
• Now you can remove the rear brake lever.
Figure 77: Rear brake lever
SERVICE MANUAL MASAI K50
46