4
133
Instruments and Controls
Functions of Controls
Menu on MIA
The MIA system uses a combination
of keys able to access and change the
customer programmable functions
present in the "Controls" or "Settings"
menu of the "Vehicle" screen page.
A shortcut to set the customer
programmable functions is available in
the "Apps" screen page.
Once you enter the “Controls” screen,
using the touch soft-keys to scroll
and change settings of the customer
programmable functions.
Touch the function soft-key to confirm
the selection.
Some functions can be set only on or
off touching the corresponding soft-
key which will be highlighted with the
yellow outline.
Other functions can have one or
more instruction/setting pages
that are accessed by touching the
corresponding soft-key.
NOTE:
• All settings must be edited with
ignition device set to ON position.
• Some of the customer programmable
functions are optional or for a
specific model/version and may not
be available on your vehicle.
• Only one touch screen area/soft-key
may be selected at a time.
• Screen Off
This function allows you to switch
off the MIA screen backlight if it
becomes annoying when driving.
• Mirror Dimmer
The auto-dimming function can be
disabled or re-enabled by touching
this soft-key.
• Rear Parking Camera
This function allows you to switch on
the Rear Parking Camera.
Functions of Settings
Menu on MIA
The MIA system uses a combination
of keys able to access and change the
customer programmable functions
present in the "Controls" or "Settings"
menu of the "Vehicle" screen page.
A shortcut to set the customer
programmable functions is available in
the "Apps" screen page.
Once you enter the “Settings” screen,
using the touch soft-keys to scroll
and change settings of the customer
programmable functions.
NOTE:
• All settings must be edited with
ignition device set to ON position.
• Some of the customer programmable
functions are optional or for a
specific model/version and may not
be available on your vehicle.
• Only one touch screen area/soft-key
may be selected at a time.
Modes for Setting a Function
To enter the desired function, touch
the corresponding soft-key on the
lateral list (the picture shown is
“Display”).